Skip to main content

Changes to Step #4

Edit by Andrew Bookholt

Pending approval

Deleted
Added
Unchanged

Step Lines

[* icon_note] Re-orient your iMac so it sits upright on the stand.
[* black] Insert a plastic card up into the corner of the air vent slot at the top of the rear case.
[* black] Push the card toward the top of the iMac to release the front bezel latch.
[* icon_note] It may take a few tries before the latch finally releases.
[* black] Pull the front bezel away from the rear case.
[* icon_note] Repeatblack] Repeat this process for the other side of the front bezel.
[* icon_note] It may be necessary to apply several layers of duct tape to the top of the access card to aid in releasing the latches.
[* icon_note] If the bezel refuses to release, try pressing the lower edge back onto the rear case and repeat this opening process.
[* icon_note] Repeatblack] Repeat this process for the other side of the front bezel.
[* icon_note] It may be necessary to apply several layers of duct tape to the top of the access card to aid in releasing the latches.
[* icon_note] If the bezel refuses to release, try pressing the lower edge back onto the rear case and repeat this opening process.

Image 3

No previous image

Added