Skip to main content

Changes to Step #2

Edit by Ron Davis

Edit approved by Ron Davis

Deleted
Added
Unchanged

Step Lines

[* black] Using a case openerplastic opening tool, start atcarefully pry up the bottom middle of the phone anddisplay glass.
[* black] Slowly
work your way around.
[* black] If
around the glue is still holdingphone, using the screen downplastic opening tool to separate the glass from the phone.
[* icon_note] As
you work, the adhesive may cool and harden. You may need to heat up the glass again withas you work your way around the heat gun or hair dryerscreen.
[* black] Using a case openerplastic opening tool, start atcarefully pry up the bottom middle of the phone anddisplay glass.
[* black] Slowly
work your way around.
[* black] If
around the glue is still holdingphone, using the screen downplastic opening tool to separate the glass from the phone.
[* icon_note] As
you work, the adhesive may cool and harden. You may need to heat up the glass again withas you work your way around the heat gun or hair dryerscreen.