Skip to main content

Changes to Step #1

Edit by Ron Davis

Edit approved by Ron Davis

Before
After
Unchanged

Step Lines

[* red] Remove the four 5.0 mm T5 Torx screws from the corners of the phone.
-[* black] Remove the four 5.5 mm T5 Torx screws from the back of the phone.
-[* icon_note] The eighth and final screw on the back cover is located under the indicated black, rubber flap.
-[* icon_caution] Do not attempt to loosen the screws with too much force or the head of the screw may become stripped.
+[* orange] Remove three 5.5 mm T5 Torx screws from the back of the phone.
+[* black] Lift up the black rubber flap near the SD card slot.
+[* yellow] Remove the single 5.5 mm T5 Torx screw beneath the flap.
+[* icon_caution] Do not attempt to loosen the screws with too much force. These screws are small, and easily stripped.

Image 1

Old Version

New Version