Skip to main content

Changes to Step #1

Edit by Ron Davis

Edit approved by Ron Davis

Before
After
Unchanged

Step Lines

-[* black] Using a T5 Torx driver, remove the eight screws. The black screws are 5.5 mm and the silver screws are 5.0 mm.
-[* icon_caution] Do not attempt to loosen the screws with too much force or the head of the screw may become stripped.
+[* red] Remove the four 5.0 mm T5 Torx screws from the corners of the phone.
+[* orange] Remove three 5.5 mm T5 Torx screws from the back of the phone.
+[* black] Lift up the black rubber flap near the SD card slot.
+[* yellow] Remove the single 5.5 mm T5 Torx screw beneath the flap.
+[* icon_caution] Do not attempt to loosen the screws with too much force. These screws are small, and easily stripped.

Image 1

Old Version

New Version

Image 2

No previous image

Added

Image 3

No previous image

Added