Skip to main content

Changes to this Step

Edit by Teal

Pending approval


Step Lines

[* black] Locate the solder on the top portion of the logic board. It will appear as a shiny silver bead of metal.
[* black] Place a piece of solder wick on top of the solder.
[* black] Very carefully, place the tip of the soldering iron on top of the solder wick. Hold it steady until the solder is soaked up into the solder wick.
[* black] Soldering iron will damage circuitry if held down for too long.
[* black] Cut off the used solder wick with pliers and repeat this step if any solder remains.

Image 1

No previous image