Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #9

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* black] Use the flat edge of a spudger to pry the headphone jack cable connector from its socket on the logic board.
[* icon_note] This connector is located on the bottom right edge of the logic board, near the right speaker. (The right speaker is removed in these photographsimages, but you don't need to remove it for this procedure.)
[* icon_noteblack] Push the cable slightly to the right.
[* icon_note] This connector is located on the bottom right edge of the logic board, near the right speaker. (The right speaker is removed in these photographsimages, but you don't need to remove it for this procedure.)
[* icon_noteblack] Push the cable slightly to the right.