Skip to main content

Changes to Step #2

Edit by Andrew Bookholt

Pending approval

Deleted
Added
Unchanged

Step Lines

[* red] Remove the two T6 Torx screws securing the LVDSdisplay data cable to the logic board.
[* black] Use the attached black tab to pull the LVDSdisplay data cable connector straight away from the logic board.
[* red] Remove the two T6 Torx screws securing the LVDSdisplay data cable to the logic board.
[* black] Use the attached black tab to pull the LVDSdisplay data cable connector straight away from the logic board.