Skip to main content

Changes to Step #2

Edit by Andrew Bookholt

Pending approval

Deleted
Added
Unchanged

Step Lines

[* red] Remove the two T6 Torx screws securing the LVDS cable to the logic board.
[*
black] Insert wisdom hereUse the attached black tab to pull the LVDS cable connector straight away from the logic board.
[* red] Remove the two T6 Torx screws securing the LVDS cable to the logic board.
[*
black] Insert wisdom hereUse the attached black tab to pull the LVDS cable connector straight away from the logic board.

Image 1

Old Version

New Version