Skip to main content

Changes to Step #3

Edit by Robert Potter

Pending approval

Before
After
Unchanged

Step Lines

-[* black] Caution, the capacitor, a black cylinder near the top of the camera, might have a charge on it, which could be painful if you touch both wires. Neutralize it by touching both wires with a screwdriver at the same time
+[* icon_caution] Caution, the capacitor, a black cylinder near the top of the camera, might have a charge on it, which could be painful if you touch both wires. Neutralize it by touching both wires with a screwdriver at the same time
[* black] Remove the flash mechanism. It is locked in place by a clip, seen from the side. Pull it toward the camera's face, and then up.
[* black] The capacitor and flash will turn out, still attached by a ribbon cable on the left.

Image 2

Deleted

Image 3

Deleted