Skip to main content

Changes to Step #3

Edit by Andrew Forster

Pending approval

Before
After
Unchanged

Step Lines

-[* black] Caution, the capacitor, a black cylinder near the top of the camera, might have a charge on it, which could be painful if you touch it. Neutralize it by touching both sides with a screwdriver at the same time
-[* black] Remove the flash mechanism.
+[* black] Caution, the capacitor, a black cylinder near the top of the camera, might have a charge on it, which could be painful if you touch both wires. Neutralize it by touching both wires with a screwdriver at the same time
+[* black] Remove the flash mechanism. It is locked in place by a clip, seen from the side. Pull it toward the camera's face, and then up.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added