Skip to main content

Changes to Step #2

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Deleted
Added
Unchanged

Step Lines

[* black] Use an opening pick to pry up the battery from the bottom.
[* icon_caution] You will be prying against the case directly above the daughterboard and antenna cables. Pry carefully to avoid damaging either of these components.
[* icon_note] You may need to reheat and reapply the iOpener repeatedly to further soften the adhesive. The adhesive is tough and it may take a few tries to get the pick started under the battery.

Image 1

No previous image

Added

Image 2

No previous image

Added