Skip to main content

Changes to Step #4

Edit by Walter Galan

Pending approval

Before
After
Unchanged

Step Lines

[* black] Use the tip of a spudger or your fingernail to flip up the retaining flap on the Bluetooth board ribbon cable ZIF socket.
[* icon_caution] Be sure you are prying up on the hinged retaining flap, ***not*** the socket itself.
[* black] Pull the Bluetooth board ribbon cable out of its socket.
+[* black] Lift and remove the Bluetooth board from the display assembly.

Image 1

No previous image

Added

Image 2

No previous image

Added