Skip to main content

Changes to Step #15

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Deleted
Added
Unchanged

Step Lines

[* black] While lifting the plastic frame out of the way, push one corner of your plastic card underneath the outside edge of the first center battery cell.
[* icon_caution] Do not pry along the edge nearest the battery connector, or you risk damaging the keyboard ribbon cable.
[* icon_note] Underneath the center battery cells, a thin metal plate protects the trackpad. Pry only under the battery cell; leave the metal plate in place.
[* black] Slide your card all the way under the battery cell, and leave it to prevent the battery cell from re-adhering.