Skip to main content

Changes to Step #11

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Deleted
Added
Unchanged

Step Lines

[* black] It's time to switch sides. Remove your book or foam block and place it under the opposite side of your MacBook Pro.
[* black] Repeat the procedure from the prior steps to separate the two battery cells on this side:
[* black] Apply your adhesive remover to the highestelevated edge of the outer battery cell, and wait 2-3 minutes for it to penetrate.
[* black] Apply your adhesive remover to the highestelevated edge of the outer battery cell, and wait 2-3 minutes for it to penetrate.
[* black] Work one corner of a plastic card underneath the battery cell, and slide the card fully underneath the battery cell to separate it.
[* black] Do the same for the adjacent cell.
[* black] Leave your plastic card in place or flip the battery cells over to prevent them from re-adhering during the following steps.