Skip to main content

Changes to Step #2

Edit by Brett Hartt

Pending approval

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] Carefully lay the iMac stand-side down on a flat surface.
+[* icon_note] Due to tight tolerances, you will have to use a thin hooked tool to lift the display out of the outer case. As seen in the third picture, we made one out of a bent paperclip.
+[* black] Use a thin hooked tool to lift one side of the top edge of the display by its steel outer frame.
+[* icon_note] After lifting the top edge of the display on one side, hold it out of the outer case while you use a hooked tool to lift the other side.
+[* icon_caution] Do not lift the top edge of the display out of the outer case too far, as several short ribbon cables still connect the two components.

Image 2

Old Version

New Version

Image 3

No previous image

Added