Skip to main content

Changes to Step #5

Edit by Timothy

Edit approved by Timothy

Deleted
Added
Unchanged

Step Lines

[* black] Slide the spudger along the edge between the keyboard and laptop bodiesbase, periodically applying pressure down on the spudger to pry the two components apart.
[* black] Slide the spudger along the edge between the keyboard and laptop bodiesbase, periodically applying pressure down on the spudger to pry the two components apart.
[* icon_note] You should hear popping sounds as you slide the spudger along the edge.
[* icon_caution] If the spudger gets stuck while sliding, simply slide the spudger back for a bit, and continue sliding forward.