Skip to main content

Changes to Step #5

Edit by Timothy

Edit approved by Timothy

Deleted
Added
Unchanged

Step Lines

[* black] Pull back onSlide the spudger along the spudger, keeping it insideedge between the crevice at all times. Stop untilkeyboard and laptop bodies, periodically applying pressure down on the left-hand side can be easily lifted.
[* black] Repeat
spudger to pry the above step for the right-hand side of the keyboardtwo components apart.
[* icon_note] You should hear popping sounds as you slide the spudger along the creviceedge.
[* black] Pull back onSlide the spudger along the spudger, keeping it insideedge between the crevice at all times. Stop untilkeyboard and laptop bodies, periodically applying pressure down on the left-hand side can be easily lifted.
[* black] Repeat
spudger to pry the above step for the right-hand side of the keyboardtwo components apart.
[* icon_note] You should hear popping sounds as you slide the spudger along the creviceedge.
[* icon_caution] If the spudger gets stuck while sliding, simply slide the spudger back for a bit, and continue sliding forward.