Skip to main content

Changes to Step #2

Edit by Andrew Bookholt

Pending approval

Deleted
Added
Unchanged

Step Lines

[* red] Remove the two 4.8 mm T6 Torx screws securing the LVDSdisplay data cable to the logic board.
[* black] Grab the LVDSdisplay data cable connector by its black tab and pull it straight up off the logic board.
[* red] Remove the two 4.8 mm T6 Torx screws securing the LVDSdisplay data cable to the logic board.
[* black] Grab the LVDSdisplay data cable connector by its black tab and pull it straight up off the logic board.