Skip to main content

Changes to Step #3

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* black] Insert a plastic card up into the corner of the air vent slot at the top of the rear case.
[* black] Push the card toward the top of the iMac to release the front bezel latch.
[* icon_noteblack] Pull the front bezel away from the rear case.
[* blackicon_note] Repeat this process for the other side of the front bezel.
[* icon_noteblack] Pull the front bezel away from the rear case.
[* blackicon_note] Repeat this process for the other side of the front bezel.