Skip to main content

Changes to Step #3

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* black] OnceGrab the small bridgefront bezel near the top edge of material has cleared the RAM arms,iMac and lift it straight up off the rear case.
[* icon_caution] The
front bezel is still attached to the iMac by itstwo cables.
[* icon_note] If your front bezel does not immediately lift off the rear case, lift the
lower edge justof the front bezel for enough clearance to insert a spudger and push up the two metal arms locking the bezel to clear the rear case.
[* black] OnceGrab the small bridgefront bezel near the top edge of material has cleared the RAM arms,iMac and lift it straight up off the rear case.
[* icon_caution] The
front bezel is still attached to the iMac by itstwo cables.
[* icon_note] If your front bezel does not immediately lift off the rear case, lift the
lower edge justof the front bezel for enough clearance to insert a spudger and push up the two metal arms locking the bezel to clear the rear case.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Old Version

New Version