Skip to main content

Changes to Step #1

Edit by Neeki Jarrami

Edit approved by Neeki Jarrami

Before
After
Unchanged

Step Lines

[* icon_note] The gyroscope is a blue rectangular circuit board on top of a white base and is closest to the wheel.
[* black] Pull outDetach the four cables connecting the gyroscope to the hoverboardhoverboard by pinching the connector clips and pulling the cables out:
[* black] Pull outDetach the four cables connecting the gyroscope to the hoverboardhoverboard by pinching the connector clips and pulling the cables out:
[* orange] Three red and black cables with white connectors.
[* yellow] One multicolored cable with a black connector.