Skip to main content

Changes to Step #1

Edit by Emily Richter

Edit approved by Emily Richter

Before
After
Unchanged

Step Lines

-[* black] Unplug the wires connecting the gyroscope to the hoverboard.
-[* icon_note] There are three red and black cables with white connectors and one multicolored cable with a black connector.
+[* black] Unplug the four cables connecting the gyroscope to the hoverboard.
+[* icon_note] The gyroscope is a blue rectangular circuit board on top of a white base and is closest to the wheel.
+[* black] There are three red and black cables with white connectors.
+[* black] There is one multicolored cable with a black connector.