Skip to main content

Changes to Step #1

Edit by Kevin Vartan

Edit approved by Kevin Vartan

Before
After
Unchanged

Step Lines

[* black] Unplug the four cables connecting the gyroscope to the hoverboard.
[* icon_note] The gyroscope is a blue rectangular circuit board on top of a white base and is closest to the wheel.
[* yellow] There are threeblack] Pull out the four cables connecting the gyroscope to the hoverboard:
[* orange] Three
red and black cables with white connectors.
[*

[*
yellow] There is oneOne multicolored cable with a black connector.
[* yellow] There are threeblack] Pull out the four cables connecting the gyroscope to the hoverboard:
[* orange] Three
red and black cables with white connectors.
[*

[*
yellow] There is oneOne multicolored cable with a black connector.

Image 1

Old Version

New Version