Skip to main content

Changes to Step #1

Edit by Klara Perkins

Edit approved by Klara Perkins

Before
After
Unchanged

Step Lines

[* black] Unplug the four cables connecting the gyroscope to the hoverboard.
[* icon_note] The gyroscope is a blue rectangular circuit board on top of a white base and is closest to the wheel.
[* green] There are three red and black cables with white connectors.
[* yellowgreen] There is one multicolored cable with a black connector.
[* yellowgreen] There is one multicolored cable with a black connector.

Image 1

Old Version

New Version