Skip to main content

Changes to Step #1

Edit by Evan Borgeson

Pending approval


Step Lines

[* black] Carefully pry off the black plastic screen cover using the iSesamo tool or another thin, flat tool.
[* icon_note] The screen cover is adhered to the phone and may take some effort to pry off. If you cannot pry it off heat the screen with a hair dryer on low for 30 seconds to soften the adhesive.
[* red] Unscrew the 4 screws near each corner of the phone's display panel by using a #00 Phillips head screwdriver.
[* icon_note] The bottom two screws may have small rubber covers that you can remove using tweezers.

Image 2

Old Version

New Version

Image 3