Skip to main content

Changes to Step #1

Edit by Evan Borgeson

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Carefully pry off the black plastic screen cover using the Isesam tool or another thin, flat tool of your choosing. The screen cover is adhered to the phone and may take some effort to pry off. If you cannot pry it off heat the screen with a hair dryer on low for 30 seconds to soften the adhesive.
[* black] After removing the screen cover. Unscrew the 4 screws near each corner of the phone's display panel by using a #00 Phillips head screwdriver. These screws are highlighted by the red circles in the picturespicture two.
[* black] After removing the screen cover. Unscrew the 4 screws near each corner of the phone's display panel by using a #00 Phillips head screwdriver. These screws are highlighted by the red circles in the picturespicture two.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Old Version

New Version