Skip to main content

Changes to Step #4

Edit by Dominik Schnabelrauch

Edit approved by Dominik Schnabelrauch

Before
After
Unchanged

Step Lines

-[* black] Mount the syringe to the braking lever.
+[* black] Fill up three quarters of the second bleeding syringe with DOT 5.1 brake fluid. Hold the syringe upright, cover the tip with a shop towel, and gently depress the plunger to purge any air bubbles from the syringe. Mount the second syringe to the braking lever.
[* black] On the caliper side install the hose on the bleeding nipple, then open the nipple 1/2 turn.
- [* icon_note] Again, watch out for air bubbles in the syringe. You don't want them.
+ [* icon_note] Assure for another time that there are no air bubbles. You want to avoid having them in your brake.