Skip to main content

Changes to Step #6

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Deleted
Added
Unchanged

Step Lines

[* black] Motherboard is now removable. Only a small piece of conductive tape attached the motherboard to the vibrator (adhered to the display assembly).
[* black] The thermal paste on the heatpipe/motherboard shielding should probably be replaced upon reassembly.
[* black] Motherboard is now removable. Only a small piece of conductive tape attached the motherboard to the vibrator (adhered to the display assembly).
[* black] The thermal paste on the heatpipe/motherboard shielding should probably be replaced upon reassembly.
[* black] Once the motherboard is removed, the cameras may be removed.
[* black] There is also an antenna interconnect cable removable at this point.
[* black] The SIM/SD ports are soldered to the main board making replacements expensive. However, these are relatively low wear and the motherboard is mostly modular.