Skip to main content

Changes to Step #9

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

[* black] Make sure that all the adhesive glue has been loosed from the battery.
-[* black] Holding the battery near the top, rotate the battery toward the right side of the iPad.
- [* icon_note] If there is still too much adhesive holding the battery in place, use the metal spudger to loosen it.
+[* black] Gently lift the left side of the battery up, rotating it toward the right side of the iPad.
+ [* icon_note] Use the metal spudger to loosen any adhesive that may still be holding the battery in place
[* black] Remove the battery from the iPad.