Skip to main content

Changes to Step #3

Edit by Nick

Edit approved by Nick

Before
After
Unchanged

Step Lines

[title] Remove the rubber bumpers
-[* icon_note] These bumpers are held on with double sided tape. The tape will likely lose it's stickiness, but it is not required.
-[* black] Once the drive is removed from the clip, remove the rubber bumpers. Pull these off of the old drive, and transfer them to the replacement.
+[* icon_note] The bumpers are held on with double sided tape. This not have to be replaced.
+[* black] Once the drive is removed from the clip, remove the rubber bumpers. Transfer them to your new drive.