Skip to main content

Changes to Step #2

Edit by Nick

Edit approved by Nick

Before
After
Unchanged

Step Lines

[title] Remove the drive clip
-[* icon_note] This step is not required if you are moving the drive to a Dell computer with the same mounting bracket or for Depot service and want to retain the hard drive.
+[* icon_note] This step is not required if you are moving the drive to a Dell computer with the same mounting system or Depot service.
[* red] To remove the drive clip, remove the ***Phillips #0*** screw holding the hard drive to the clip.
[* orange] Once the screw is removed, remove the drive starting from the side with the screw.
[* yellow] Remove the drive from the right side by removing the drive from the alignment pin.