Skip to main content

Changes to Step #1

Edit by Nick

Edit approved by Nick

Before
After
Unchanged

Step Lines

[title] Remove the chassis screws
-[* black] To remove the hard drive from the computer, remove the two screws holding it in. Use the ***Phillips #1*** bit to do this.
-[* icon_caution] The screw marked in orange is directly screwed into the chassis. ***If this screw is overtightened, the hard drive clip will need to be replaced.***
+[* icon_caution] The screw marked in orange is directly screwed into the chassis. ***''This hole WILL break if overtightended.''***
+[* black] To remove the hard drive from the computer, remove the ***''two''*** screws. Use the ***''Phillips #1''*** bit.