Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by Ron Davis —

Edit approved by Ron Davis

Before
After
Unchanged

Step Lines

[* black] Remove 11 screws (7.23mm,red] Remove eleven 7.23mm Phillips head - J1 bit)#1 screws from the back panel.
[* black] Using a spudger, carefully separate back panel from main body.
[* red] The back panel is still attached to the main body by a ribbonribbon cable. Use care not to damage the ribboncable.
[* black] Remove 11 screws (7.23mm,red] Remove eleven 7.23mm Phillips head - J1 bit)#1 screws from the back panel.
[* black] Using a spudger, carefully separate back panel from main body.
[* red] The back panel is still attached to the main body by a ribbonribbon cable. Use care not to damage the ribboncable.