Skip to main content

Changes to Step #6

Edit by stuart_le

Edit approved by stuart_le

Deleted
Added
Unchanged

Step Lines

[* red] Remove the two screws holding the plastic casing together using the screwdriver tool.
[* blackicon_note] The plastic cover contains warnings, and is located on the device's handle.
[* blackicon_note] The plastic cover contains warnings, and is located on the device's handle.
[* black] Once completed, the inside components will be exposed.
[* black] Place the two screws and the plastic cover to the side for reassembly.
[* black] Place the two screws and the plastic cover to the side for reassembly.