Skip to main content

Changes to Step #6

Edit by Tan Bui

Edit approved by Tan Bui

Deleted
Added
Unchanged

Step Lines

[* black] Remove the two 27mm screws holding the plastic casing together using the screwdriver tool.
[* black] Remove the two 27mm screws holding the plastic casing together using the screwdriver tool.
[* black] The plastic cover contains warnings, and is located on the device's handle.
[* black] Once completed, the inside components will be exposed.
[* black] Place the two 27mm screws and the plastic cover to the side for reassembly.
[* black] Place the two 27mm screws and the plastic cover to the side for reassembly.

Image 1

No previous image

Added