Skip to main content

Changes to Step #5

Edit by Cassidy Madrigal

Edit approved by Cassidy Madrigal

Deleted
Added
Unchanged

Step Lines

[* black] Remove the 3mm screw holding the metal spring plate in place with the 3.0 flathead screwscrewdriver.
[* black] Remove the 3mm screw holding the metal spring plate in place with the 3.0 flathead screwscrewdriver.
[* black] Place the screw and spring plate to the side for reassembly at a later time.
[* icon_note] Removing this screw allows for removal of the barrel from the iron itself. Be sure not to pull on the barrel.