Skip to main content

Changes to Step #3

Edit by Cassidy Madrigal

Edit approved by Cassidy Madrigal

Deleted
Added
Unchanged

Step Lines

[* black] Unscrew the two 3mm screws from both sides of the barrel clip with a 3.0 flathead screwscrewdriver to remove the clip from the barrel.
[* black] Unscrew the two 3mm screws from both sides of the barrel clip with a 3.0 flathead screwscrewdriver to remove the clip from the barrel.
[* red] Set the two screws and barrel clip aside for reassembly at a later point.
[* icon_caution] Clip is prone to pop off from the body due to the weight of the spring. Equally loosen each screw little by little to prevent this.