Skip to main content

Changes to Step #3

Edit by stuart_le

Edit approved by stuart_le


Step Lines

[* black] Unscrew the two 3mm screws from both sides of the barrel clip to remove the clip from the barrel.
[* black] Set the two screws and barrel clip aside for reassembly at a later point.
[* icon_caution] Warning: Clip is prone to pop off from the body due to the weight of the spring. Equally loosen each screw little by little to prevent this.
[* black] If you are replacing the barrel clip, place the old component to the side. Carefully align the new barrel clip with the proper screw holes, and use the screwdriver to screw the two 3mm screws into to body.