Skip to main content

Changes to Step #3

Edit by stuart_le

Edit approved by stuart_le

Deleted
Added
Unchanged

Step Lines

[* black] Unscrew the two 3mm screws from both sides of the barrel clip to remove the clip from the barrel.
[* black] Set the two screws and barrel clip aside for reassembly at a later point.
[* icon_caution] Warning: Clip is prone to pop off from the body due to the weight of the spring. Equally loosen each screw little by little to keep the clip from popping off because of the springprevent this.
[* icon_caution] Warning: Clip is prone to pop off from the body due to the weight of the spring. Equally loosen each screw little by little to keep the clip from popping off because of the springprevent this.