Skip to main content

Changes to Step #3

Edit by Tyler

Edit approved by Tyler

Deleted
Added
Unchanged

Step Lines

[* black] Remove the metal barrel clip by unscrewingUnscrew the two 3mm screws on each side usingfrom both sides of the screwdriver tool.
[*
barrel clip to remove the clip from the barrel.
[*
black] Set the two screws aside for reassembly at a later point.
[* icon_caution] Warning: Equally loosen each screw little by little to keep the clip from popping off because of the spring.
[* black] Remove the metal barrel clip by unscrewingUnscrew the two 3mm screws on each side usingfrom both sides of the screwdriver tool.
[*
barrel clip to remove the clip from the barrel.
[*
black] Set the two screws aside for reassembly at a later point.
[* icon_caution] Warning: Equally loosen each screw little by little to keep the clip from popping off because of the spring.