Skip to main content

Changes to Step #1

Edit by tekjew

Edit declined by Evan Noronha


Step Lines

[* icon_note] The home button assembly is attached to the front panel with some adhesive. The use of an iOpener to soften the adhesive is highly recommended.
[* black] Place the iOpener in the microwave and microwave it for ***thirty seconds*** on the highest power setting.
[* icon_caution] Be careful not to overheat the iOpener during the repair procedure. We recommend waiting at least three minutes before reheating the iOpener.
[* black] Place the iOpener over the home button on the front edge of the display.
+[* icon_note] iFixIt Full Assembly Fix Kits include the home button and home button mount; it is not necessary to remove and reuse your old one.