Skip to main content

Changes to Step #1

Edit by Sam Goldheart

Edit approved by Sam Goldheart


Step Lines

+[* icon_note] The home button assembly is attached to the front panel with some adhesive. The use of an iOpener to soften the adhesive is highly recommended.
+[* black] Place the iOpener in the microwave and microwave it for ***one minute*** on the highest power setting.
+ [* icon_caution] Be careful not to overheat the iOpener during the repair procedure. We recommend waiting at least two minutes before reheating the iOpener.
+[* black] Place the iOpener over the home button on the front edge of the display.

Image 1

No previous image