Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

[* black] Remove the following seven screws securing the logic board to the rear aluminum panel.
[* red] Six 2.1mm Phillips #00
[* icon_note] One of these screws, at the top of the logic board, is tucked beneath the headphone jack assembly cable. Take care to hold the cable out of the way while removing and replacing this screw.
[* orange] One 2.5mm Phillips #00