Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to this Step

Edit by Walter Galan

Pending approval

Before
After
Unchanged

Step Lines

[* black] Peel back and remove the adhesivepiece of electrical tape covering the headphone jack assembly cable connector.
[* black] Using the tip of a spudger, flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board.board.
[* black] Peel back and remove the adhesivepiece of electrical tape covering the headphone jack assembly cable connector.
[* black] Using the tip of a spudger, flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board.board.