Skip to main content

Changes to Step #3

Edit by Claire Rapp

Edit approved by Claire Rapp

Before
After
Unchanged

Step Lines

[*title] LCD/digitizer assembly
[*
black] Slide a flat tool between the LCD/Tacticle'sLCD/digitizer's black support and the console casing then lift it gently. Next, slide a metronomean opening pick underneath to maintain it.
[* icon_caution] The layer indicated by the red arrowsarrow is not really a nuisance but it's nevertheless necessary to pay attention so that you do not damage it during this stagestep.
[* black] Next, you can either lift the whole thing from underneath by pushing it up or continue to make your way around, declipping the whole and extracting itit.
[*title] LCD/digitizer assembly
[*
black] Slide a flat tool between the LCD/Tacticle'sLCD/digitizer's black support and the console casing then lift it gently. Next, slide a metronomean opening pick underneath to maintain it.
[* icon_caution] The layer indicated by the red arrowsarrow is not really a nuisance but it's nevertheless necessary to pay attention so that you do not damage it during this stagestep.
[* black] Next, you can either lift the whole thing from underneath by pushing it up or continue to make your way around, declipping the whole and extracting itit.