Skip to main content

Changes to Step #2

Edit by Claire Rapp

Edit approved by Claire Rapp

Before
After
Unchanged

Step Lines

[*title] Support of the NFC antenna
[*
red] The piecepart marked in red is the support for the NFC antenna. You must remove this before proceeding towith the LCD/Tacticle blockLCD/digitizer assembly.
[*title] Support of the NFC antenna
[*
red] The piecepart marked in red is the support for the NFC antenna. You must remove this before proceeding towith the LCD/Tacticle blockLCD/digitizer assembly.
[* black] Release the plastic support clips of the NFC antenna using a thin tool on the top and bottom. Then, detatch it.