Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #6

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* red] Remove the small Phillips screw securing the LVDSdisplay data cable ground loop to the upper case.
[* black] Disconnect the LVDSdisplay data cable by pulling its connector straight away from the socket on the logic board.
[* red] Remove the small Phillips screw securing the LVDSdisplay data cable ground loop to the upper case.
[* black] Disconnect the LVDSdisplay data cable by pulling its connector straight away from the socket on the logic board.