Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #6

Edit by Andrew Bookholt

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Lift the heat sink up off the logic board.
[* icon_note] Be mindful of the microphone cable when lifting the heat sink, as it can get tangled on the top edge of the fan.
[* icon_note] Ificon_caution] When you havemount the A1304 version of MacBook Air,heat sink back onto the fan islogic board, be sure to apply a separate component from the heat sink. Lift the fan out fromnew layer of thermal paste. We have a [guide|744|guide] that makes replacing the machine at this point. 5,0 Screwthermal paste easy.
[* icon_note] Ificon_caution] When you havemount the A1304 version of MacBook Air,heat sink back onto the fan islogic board, be sure to apply a separate component from the heat sink. Lift the fan out fromnew layer of thermal paste. We have a [guide|744|guide] that makes replacing the machine at this point. 5,0 Screwthermal paste easy.

Image 1

No previous image

Added