Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

[* black] Use the tip of a spudger to lift the right fan connector straight up from its socket on the logic board.
[* icon_caution] Be sure to only pry up on the connector itself '''not on the socket''' or you may damage the machine.
[* icon_note] It is useful to twist the spudger axially from beneath the fan cable wires to release the connector.
[* black] Remove the right fan from the case.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added