Skip to main content

Changes to Step #7

Edit by Emma Hoogenboezem

Edit approved by Emma Hoogenboezem

Before
After
Unchanged

Step Lines

-[* black] Attach the two batteries to each other with tape, in case you have two separate batteries. Use solder and a solder iron to attach the new battery to the wires.
+[* black] Attach the two batteries to each other with tape, in case you have two separate batteries.
+[* black] Use solder and a solder iron to attach the new battery to the wires.
[* icon_note] The black wire should be connected with the negative pole of the two-wire side.
+[* icon_note] The wire should be warm enough to solder the battery to the wire.
+[* black] Slide the tubings on each connection and heat each tubing with a lighter to make them shrink.